g
EDID Store button and LED —
An LED and a recessed push button switch is available
for EDID Store status and configuration.
NOTE:
The EDID Store DIP switch must be in the On (up) position to store EDID.
z
z
EDID Store LED —
A tricolored LED provides the status of the EDID.
z
z
Unlit —
EDID Store is not enabled; the EDID Store DIP switch is in the
Off (down) position. The factory default EDID is being used.
z
z
Red —
EDID Store is enabled, but EDID from an external source has not been
stored. The factory default EDID is still present.
z
z
Green —
EDID Store is enabled and external EDID is currently stored.
z
z
Amber —
EDID Store is enabled and an external EDID is currently being read
and stored. When complete, the LED turns green.
z
z
EDID Store push-button —
Use this recessed push-button switch to store the EDID
of the display that is connected to the HDMI output.
NOTE:
See the "
EDID Configuration Table
" on page 9 for more information
on using this switch with EDID.
h
Configuration DIP switches —
A 2-pole DIP switch is used to configure the following
features of the HAE 100.
z
z
EDID Store —
Use this DIP switch to enable or disable the EDID Store function.
When in the Off (down) position, EDID Store is disabled and the factory default
EDID is being used. When in the On (up) position, EDID Store is enabled and allows
a stored EDID to be used.
NOTE:
See the "
EDID Configuration Table
" on page 9 for more information
on using this switch with EDID.
z
z
HDMI Output Audio —
Use this DIP switch to enable or disable audio on the
HDMI output. When in the Off (down) position, audio will only be present over the
S/PDIF output and/or analog output. When in the On (up) position, audio is present
over the HDMI output, the Analog output, and/or the S/PDIF output simultaneously.
NOTE:
If the incoming audio signal is bitstream (Dolby Digital or DTS), it may
be necessary to set this switch to the Off (down) position since many
display devices do not support these formats.
HAE 100 HDMI Audio Extractor • Panels and Cabling
7
