Extron electronics FOXBOX 4G Rx VGA, Руководство пользователя

Страница: 8 / 35

FOXBOX 4G Tx/Rx • Introduction
Introduction, cont’d
1-4 FOXBOX 4G Tx/Rx • Introduction 1-5
The FOXBOX 4G VGA receiver outputs VGA - UXGA RGB
video.
The FOXBOX 4G DVI receiver outputs a single link of DVI
video.
The receivers convert the proprietary signal(s) back to video
(either RGB or DVI as applicable to the model), audio, and
serial RS-232 communication, and output the signals locally.
If either RS-232 return or daisy-chained communications are
implemented (a second fiber optic cable is installed), the receiver
outputs a proprietary serial communication signal on the second
fiber optic cable. For video resolutions up to 1600 x 1200, the
receiver's video output is a perfect, pixel-for-pixel recreation of
the video signal input to the transmitter.
The transmitter and receiver have image and audio adjustments
available under RS-232 control. Both units have image, audio,
and fiber light status and lost-light alarm indicators.
The FOXBOX 4G VGA transmitter can handle an RGBHV, RGBS,
RGsB, or RsGsBs input signal. The FOXBOX 4G VGA receiver
can output RGBHV or RGsB, as selected by the user.
The receivers have built-in alternating pixels, Color Bars,
and grayscale test patterns to assist in setting up the display
equipment.
The FOXBOX 4G transmitters and receivers are rack and
furniture mountable and have external power supplies that
provide worldwide power compatibility.
N
The FOXBOX 4G DVI does not support the
transmission of signals with High-bandwidth Digital
Content Protection (HDCP).
N
A FOXBOX 4G Tx VGA transmitter is fully
compatible with a FOXBOX 4G DVI Rx receiver.
A FOXBOX 4G DVI Tx transmitter is fully
compatible with a FOXBOX 4G Rx VGA receiver.
The FOXBOX 4G units are fully compatible with all
Extron FOX 500 products and a variety of other fiber
optic products. Those other products are identified where
appropriate, but not specifically described in this manual.
Cable transmission modes
The transmitters and receivers are further categorized by the
type of fiber optic cable, multimode or singlemode, which define
the effective range of transmission:
•
Multimode — Up to 150 m (450')

FOXBOX 4G Tx VGA MM

FOXBOX 4G Rx VGA MM

FOXBOX 4G Tx DVI MM

FOXBOX 4G Rx DVI MM
• Singlemode — Very long distance, up to 30 km
(18.75 miles)

FOXBOX 4G Tx VGA SM

FOXBOX 4G Rx VGA SM

FOXBOX 4G Tx DVI SM

FOXBOX 4G Rx DVI SM
N
The multimode and singlemode products are physically
and functionally identical, with the exception of the
effective range of transmission. In this manual, any
reference applies to either transmission mode unless
otherwise specified.
Features
Ultra high performance — Offers perfect, pixel-for-pixel
RGBHV video or DVI video transmission, up to
1600 x 1200 at 60 Hz.
Video input —
FOXBOX 4G VGA — The transmitter accepts RGBHV,
RGBS, RGsB, or RsGsBs on a 15-pin HD connector.
FOXBOX 4G DVI — The transmitter accepts a single link
of DVI-D video on a DVI-I connector.
EDID emulation mode (FOXBOX 4G Tx DVI only) — The
FOXBOX 4G DVI transmitter provides a function, under
RS-232 control, for specifying the rate of the incoming DVI
signal. EDID emulation mode allows proper operation
when no local monitor is present.