Extron electronics FOX3 Matrix 160x Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 61

background image

Fiber Optic I/O Boards

By adding or removing I/O boards, the size of the FOX3 matrix switcher can be increased
and decreased within the range of an 8-input by 8-output matrix to:

•

FOX3 Matrix 24x

— 24 inputs and outputs.

•

FOX3 Matrix 40x

— 40 inputs and outputs.

•

FOX3 Matrix 80x

— 80 inputs and outputs.

•

FOX3 Matrix 160x

— 160 inputs and outputs.

•

FOX3 Matrix 320x

— 320 inputs and outputs.

NOTE:

The I/O boards are hot-swappable. You do not need to power down the

switcher to remove or install an I/O board.

The Extron proprietary fiber optic signal can include video, stereo audio, and transmitter-
to-receiver RS-232 serial communications. The FOX3 transmitters include all of the same
content plus USB extension.

Audio I/O Board

The matrix switchers have a removable audio board that includes four analog audio inputs
and four analog audio outputs, a DMP expansion port, and two Dante audio network ports.

NOTES:

•

The FOX3 Matrix 24x has two analog audio inputs and two analog audio outputs.

•

The audio board is hot-swappable. You do not need to power down the switcher to
remove or install an audio board.

Controller Board

The controller board has the reset button and two rear panel remote control connectors, the
LAN (Ethernet) RJ-45 port and Remote RS-232 port.
The matrix switcher can be remotely controlled using either the Extron Product Configuration
Software or the Simple Instruction Set (SIS). Control is available via:

•

A rear panel Remote RS-232 port

•

A rear panel LAN port

•

A front panel USB Config (configuration) port

SIS is a set of basic ASCII code commands that provide simple control through a control
system or PC without the need to enter long strings of code. SIS commands can be entered
via any of the ports listed above.
The switcher can be operated remotely by any of the following connected to the switcher:

•

A control system

•

A PC computer

NOTE:

The controller board is hot-swappable. You do not need to power down the

switcher to remove or install a controller board.

FOX3 Matrix Series Switchers • Introduction

3

«
...
9
10
11
12
13
...
»

Содержание FOX3 Matrix 160x






























































Отзывы:

Нет отзывов

Похожие инструкции для FOX3 Matrix 160x

Бренд: Painless Performance Products Страницы: 2

SANbox 5000 Series

Бренд: Qlogic Страницы: 8

Бренд: Intermatic Страницы: 1

Бренд: Edge-Core Страницы: 9

Бренд: LevelOne Страницы: 17

Бренд: DANLERS Страницы: 2

Бренд: Black Box Страницы: 10

TGS-1080-M12 Series

Бренд: ORiNG Страницы: 2

Бренд: BERNSTEIN Страницы: 38

Бренд: serverLink Страницы: 2

Бренд: Metra Electronics Страницы: 8

Бренд: C&H Technologies Страницы: 28

Бренд: Synergy Global Technology Страницы: 9

8 Port 10/100 Ethernet Switch

Бренд: OnQ Technologies Страницы: 14

Бренд: TRENDnet Страницы: 2

Бренд: Lutron Electronics Страницы: 2

Бренд: Watchguard Страницы: 26

Бренд: IP-COM Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды