Extron electronics FOX3 Matrix 160x Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 61

background image

Power

Apply power by connecting one or both power cords between the Primary and Redundant
AC power connectors and the AC sources. The switcher performs a self-test that flashes
the front panel power LEDs.
The current configuration and all presets are saved in non-volatile memory. When power is
applied, the most recent configuration is retrieved.
If an error occurs during the self-test, the switcher locks up and fails to respond to
commands. If the switcher locks up on power-up, call the Extron S3 Sales and Technical
Support Hotline (see the contact numbers listed on the

Extron website

for the nearest

office).

Matrix Operations

The FOX3 Matrix can be operated in one of two modes: Port mode and System Mapping
mode.

NOTE:

The FOX3 matrix is initially in Port mode when it is powered for the first time.

•

In

Port mode

, each physical SFP on the Matrix represents In 1 and Out 1.

•

In

System Map mode

, multiple SFP modules can be combined via PCS to create

a configuration map. This mode is used to simplify system switching and USB group
switching for cross display applications (see the

FOX3 Matrix Series PCS Help File

for

detailed instructions).

Secure Direct Port Access

Open an associated UART port to send serial data to its captive screw connector. The
control system connects via LAN port to the FOX3 Matrix LAN port. The device being
controlled connects to the receiver RS-232 captive screw port. The user must configure
the endpoint for Ethernet to Captive Screw RS-232 Insertion via PCS (see the

FOX3 Matrix

Series PCS Help File

).

Example of an Ethernet to captive screw system (see

•

On the FOX3 Matrix, configure the

Secure

Direct

Port

Access

via PCS and assign

the UART ports.

•

On the FOX3 transmitter and receiver, configure the

RS-232

Insertion via PCS.

•

The control system is connected to the FOX3 Matrix Ethernet LAN port.

•

The control system then sends a control command through the receiver fiber SFP A
port, to the receiver captive screw port, to the display to take some action.

•

The response from the display is sent back to the control system.

FOX3 Matrix Series Switchers • Operation

14

«
...
20
21
22
23
24
...
»

Содержание FOX3 Matrix 160x






























































Отзывы:

Нет отзывов

Похожие инструкции для FOX3 Matrix 160x

Бренд: National Instruments Страницы: 32

Бренд: SMC Networks Страницы: 43

Бренд: Waters Network Systems Страницы: 16

S12500G-AF Series

Бренд: H3C Страницы: 105

Бренд: G-Lab Страницы: 12

S5560S-EI Series

Бренд: H3C Страницы: 47

Бренд: Hama Страницы: 56

Бренд: Jerguson Страницы: 16

Бренд: Belkin Страницы: 40

Бренд: NTI Страницы: 15

Бренд: Comet Labs Страницы: 46

Бренд: SMART-AVI Страницы: 9

OMNICUBE F1DK102P

Бренд: Belkin Страницы: 21

Бренд: Lindy Страницы: 2

Бренд: Kinesis Страницы: 12

Champion KD-4X4XC

Бренд: Key Digital Страницы: 8

Бренд: Rose electronics Страницы: 68

Бренд: Omron Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды