Extron electronics EDID 101H 4K PLUS, Руководство пользователя

Страница: 34 / 35

ATTENTION:
• Valid firmware files must have the file extension S19. A file with any other
extension is not a firmware upgrade for this device and could cause the device to
stop functioning.
•
Les fichiers firmware valides doivent contenir l’extension fichier S19. Un fichier avec
n’importe quelle autre extension n’est pas une mise à jour de firmware pour cet ap-
pareil et l’appareil pourrait arrêter de fonctionner.
1
Figure 19 Firmware Loader Main Screen
1.
Highlight the distribution amplifier in the device list and click
Begin
(see figure 19,
1
)
.
The following indicators show the progress of the update:
•
The
Transfer Time
section shows the amounts of remaining and elapsed time for
the update (see figure 20,
1
) .
•
The
Total Progress
section displays a progress bar with
Uploading...
above it
(
2
).
•
In the
Devices
section, the
Progress
column displays an incrementing percentage
and another progress bar. The
Status
column displays
Uploading
.
2. The upload is complete when the
Remaining Time
field shows
00.00.00
, the
Progress
column shows 100% , and Completed is displayed above the progress bar and in the
Status field. Close the Firmware Loader software.
1
2
Figure 20. Firmware Loader Progress Bar
3. After uploading the firmware file, the program verifies the file successfully uploaded.
When the verification is finished, the update is completed (see figure 20,
1
and
2
).
4.
The upload is complete when the
Remaining Time
field shows
00.00.00
, the
Progress
column shows
100%
, and
Completed
is displayed above the progress bar and in the
Status
field. Close the Firmware Loader software or s
elect
File > Exit
to exit the
program
.
EDID 101H 4K PLUS • Reference Information 26