Extron electronics EDID 101H 4K PLUS, Руководство пользователя

Страница: 14 / 35

EDID 101H 4K PLUS • Installation and Operation 6
Securing the HDMI Connector LockIt Lacing Bracket
Follow these instructions to secure the input connectors to the switcher with the LockIt HDMI lacing
bracket provided:
3
1
2
3
4
5
Figure 4.
LockIt Lacing Bracket Diagram
1.
Plug the HDMI cable into the rear panel connection (see figure 4,
1
).
2.
Loosen the HDMI connection mounting screw from the panel enough to allow the LockIt lacing
bracket to be placed over it
2
. The screw does not have to be removed.
3.
Place the LockIt lacing bracket on the screw and against the HDMI connector
3
, then tighten
the screw to secure the bracket.
ATTENTION:
•
Do not overtighten the HDMI connector mounting screw. The shield it fastens to is very
thin and can easily be stripped.
•
Ne serrez pas trop la vis de montage du connecteur HDMI. Le blindage auquel elle est
attachée est très fin et peut facilement être dénudé.
4.
Loosely place the included tie wrap around the HDMI connector and the LockIt lacing bracket as
shown
4
.
5.
While holding the connector securely against the lacing bracket, tighten the tie wrap, then remove
any excess length
5
.
Securing the HDMI connector LockIt
Lacing Bracket
figure 1