Extron electronics EDID 101H 4K PLUS, Руководство пользователя

Страница: 13 / 35

Rear Panel Features and Cabling
POWER
12V
0.3A MAX
OUTPUT INPUT
EDID 101H 4K PLUS
A
B
C
Figure 2. EDID 101H 4K PLUS Rear Panel
A
Power Connector – Connect the included 12 VDC power supply to this two-pole,
3.5 mm captive screw connector.
Figure 3. 12 VDC Power Connection to EDID 101H 4K PLUS
B
HDMI input – Connect an HDMI source to this female HDMI connector.
HDCP 2.2 – When required, the HDMI input negotiates and authenticates HDCP 2.2
with a source device. The authentication process is repeated when a stored EDID is
changed. See
Securing the HDMI connector LockIt Lacing Bracket on page 6.
C
HDMI output – Connect a display or other output device to this female HDMI
connector. The HDMI output provides 12VDC, (up to 1 A with over-current protection)
on pin 16. See
Securing the HDMI connector LockIt Lacing Bracket on page 6.
HDCP – If a connected output device requires HDCP encryption, the output negotiates
and authenticates HDCP directly.
Video Format Correction
– When the current input signal is HDMI and the connected
output is DVI, the signal is converted to DVI format. This is based on the capability of
the connected output device as listed in its EDID.
The EDID information is read from the connected output device and written to memory
whenever the output device is connected to this port and powered on.
NOTE: The EDID information is also read and stored whenever power is recycled
to the connected output device or when the output device is replaced.
Rear Panel Features and
Cabling
EDID 101H 4K PLUS • Installation and Operation 5
SECTION A–A
Ridges
Smooth
A
A
3/16"
(5 mm) Max.
POWER
12V
0.3A MAX