DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Installation and Operation
10
2.
Using the four short screws, attach the transmitter to the flanged edges of the mounting
plate (see figure 6).
Wall Box
Mounting
Plate
HDM
I IN
PWR
HDCP
HDMI
VGA
AUT
O
VGA IN
AUD
IO IN
AUDIO IN
DTP T
EU 232
Figure 6.
Transmitter Installation (EU Unit Shown)
Front Panel Connectors
HDMI IN
PWR HDCP HDMI VGA AUTO
VGA IN
DTP T EU 332
AUDIO IN
AUDIO IN
B
C
C
A
Figure 7.
Front Panel Connectors (DTP T EU 322 Shown)
A
HDMI input port
(see below)
C
Audio In connectors
(see
page 11
)
B
Analog video input port
(see below)
NOTE:
All transmitter models in this guide have a similar front panel appearance.
A
HDMI input port
— Connect a digital video source into the switching
transmitter via this HDMI connector. It can accept HDMI, DVI (with an
appropriate adapter), or dual mode DisplayPort video sources.
NOTES:
•
The maximum HDMI cable length is 4.5 m (15 feet).
•
Use an Extron LockIt lacing bracket to secure the HDMI connector to the
device (see
HDMI Connection
on page 12).
B
Analog video input port
— Connect an analog video source (RGB
and component) video source into the switching transmitter via this
15-pin HD connector. See
VGA connector Wiring
on page 13 to for
connector pinout.
