Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Advanced Configuration (continued)
Front Panel Lock (Executive Mode)
Enable lock mode
1
X
Exe
1
]
Lock the front panel controls.
Disable lock mode
0
X
Exe
0
]
Unlock front panel controls. All
front panel adjustments can be
made.
View lock mode status
X
X2(
]
In verbose modes 2 and 3:
Exe
X2(
]
View current lock mode status
X2(
.
Overscan Mode
(Applies only to SMPTE input rates: 480i, 576i, 1080i, 720p, 1080p, 2K, and 4K)
Set value
E
6*
X3*
OSCN
}
Oscn
6*
X3*
]
Set the selected input to
overscan mode
X3*
.
View status
E
6
OSCN
}
X3*
]
In verbose modes 2 and 3:
Oscn
6*
X3*
]
Show overscan mode status
X3*
for the input.
Video Signal Presence
View signal presence —
non-xi model
E
0LS
}
X6!
]
In verbose modes 2 and 3:
In00
•
X6!
]
View video signal status
X6!
.
View signal presence —
xi model
E
0LS
}
X6!
*
X6!
]
In verbose modes 2 and 3:
In00
•
X6!
*
X6!
]
View video signal status
X6!
for
both inputs (displayed as
InA*InB
).
HDCP Notification
Set HDCP notification
E
N
1*
X4&
HDCP
}
Hdcp
N
1*
X4&
]
Set the HDCP notification to
X4&
.
View notification
E
N
1
HDCP
}
X4&
]
In verbose modes 2 and 3:
Hdcp
N
1*
X4&
]
View the HDCP notification
selection.
Unsolicited Signal Statuses
Enable unsolicited
responses
E
S
1
NTFY
}
Ntfy
S
1
]
Enable unsolicited signal status
responses from the DSC.
Disable unsolicited
responses
E
S
0
NTFY
}
Ntfy
S
0
]
Disable unsolicited responses
from the DSC (default).
View unsolicited
responses state
E
S
NTFY
}
X4(
]
In verbose modes 2 and 3:
Ntfy
S
X4(
]
View state (On-Off) of unsolicited
signal status responses.
NOTE:
The following is an example of an unsolicited message that is generated by an xi model when both inputs
become disconnected:
In00
0*0
. In this message,
In00
is the command tag and
0*0
represent inputs A * B.
NOTE:
X2(
= Front panel lock mode (executive mode):
0
= Unlock front panel (default),
1
= Lock front panel.
X3*
= Overscan mode:
0
= 0.0% — A true Auto-Image is executed on SMPTE inputs (default).
1
= 2.5% — Auto-Image commands snap to a 2.5% table (no true Auto-Image is performed).
2
= 5.0% — Auto-Image commands snap to a 5.0% table (no true Auto-Image is performed).
X6!
= View video signal status:
0
= No video signal detected,
1
= Video signal detected.
X4&
= HDCP notification mode:
0
= Black screen (notification disabled and output muted),
1
= Green screen with OSD message (default),
2
= User HDCP logo.
X4(
= Unsolicited signal status response:
0
= Enabled,
1
= Disabled.
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
63
Содержание DSC HD-HD 4K Plus A Series
Страница 1: ...User Guide DSC HD HD 4K Plus A Series Scalers HDMI to HDMI 4K Scalers 68 2803 01 Rev A 06 16...
Страница 6: ......
Страница 8: ...DSC HD HD 4K Plus A Series Contents viii...