Extron electronics CrossPoint 450 Plus 2412 HV, Руководство пользователя

Страница: 144 / 214

Matrix Software, cont’d
CrossPoint / MAV Matrix Switchers • Matrix Software
5-8
Edit this field as follows:
1 . Click in the Matrix IP address field. The graphic cursor becomes a text cursor.
2 . Edit the address as desired.
3 . Press the Tab key on the keyboard or click in another field to exit the Matrix IP
Address field.
4 . Click the Take button to make the address change take effect.
Extron Name/Descriptor field
The Extron Name/Descriptor field contains the name used as the “from”
information when the CrossPoint or MAV switcher e-mails notification of its failed
or repaired status. This descriptor can be changed to any valid name, up to 12
alphanumeric characters.
N
The following characters are invalid in the Extron Name/Descriptor field:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
Edit this field as follows:
1 . Click in the Extron name/descriptor field. The graphic cursor becomes a text
cursor.
2 . Edit the name as desired.
3 . Press the Tab key on the keyboard or click in another field to exit the Extron
Name/Descriptor field.
4 . Click the
Take
button to make the name change take effect.
Gateway IP address field
The Gateway IP Address field identifies the address of the gateway to the mail
server to be used if the CrossPoint or MAV switcher and the mail server are not on
the same subnet.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric octets separated by dots
(periods). Each field can be numbered from 000 through 255. Leading zeroes, up to
3 digits total per field, are optional. Values of 256 and above are invalid.
Edit this field as follows:
1 . Click in the Gateway IP Address field. The graphic cursor becomes a text
cursor.
2 . Edit the address as desired.
3 . Press the Tab key on the keyboard or click in another field to exit the Gateway
IP Address field.
4 . Click the Take button to make the address change take effect.