Extron electronics CrossPoint 450 Plus 2412 HV, Руководство пользователя

Страница: 126 / 214

Programmer’s Guide, cont’d
CrossPoint / MAV Matrix Switchers • Programmer’s Guide
4-16
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, gain, volume, mutes, presets, and DSVP (continued)
N
X(
= Global or room preset # 00 - 32, 10 maximum for a room preset (00 = current configuration)
X#
= Output number 01 – (maximum number of outputs for your model)
X@
= Input number (for tie) 00 – (maximum number of inputs for your model) (00 = untied)
X1)
= Room # (for room presets) 10 max. (each can have up to 10 presets (
X(
s) assigned)
View audio global preset
configuration
EX(
*
X#
*2VC
} X@
n
•
X@
n +1
•...•
X@
n
+
15
•Aud
]
Show preset
X(
’s audio
configuration. Show
the input (
X@
) tied to 16
sequential outputs, starting
from output
X#
.
Command description:
Response description:
preset #*starting output # (StO#)*2(=audio) VC
input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15• Aud
]
N The starting output number (
X#
) should always be “1” for matrix sizes of 16 outputs or smaller.
N
EX(
*
X#
*2VC
}
where
X(
= 0 returns the switcher’s current audio configuration.
Example:
(MAV Plus 2412)
E
15*1*2VC
}
01 Output:
Response = tied input:
input 1 tied to output 3
02 03 04 05 06 07 08 09 10 11 12
01•01•01•01•02•22•22•00•03•03•03•03•--•--•--•--•Aud
13 14 15 16
no tied input no outputs
Each position shown in the response is an output: left = starting output (1),
right = starting 15 (16). The number in each position is the input tied to that
output. (Outputs 13 through 16 are not present on the MAV Plus 2412.)
In this example, preset 15, audio input 1 is tied to outputs 1 through 4; input 2 is tied to
output 5; input 3 is tied to outputs 9 through 12; and input 22 is tied to outputs 6 and 7.
No input is tied to output 8. Outputs 13 through 16 are not present on this switcher.
View video room preset
configuration
EX1)
*
X(
*
X#
*1VC
}
X@
n
•
X@
n +1
•...•
X@
n +
15
•
Vid
]
Show room
X1)
, preset
X(
’s
video configuration. Show
the input (
X@
) tied to 16
sequential outputs assigned
to room
X1)
, starting from
output
X#
.
Command description:
Response description:
room #*room preset #*starting output # (StO#)* 1 (=video) VC
input # (I#) tied to StO#•I# tied to StO#+1• ... •I# tied to StO#+15• Vid
]
N
The starting output number (
X#
) should always be “1” for matrix sizes of 16 outputs or smaller.
View audio room preset
configuration
EX1)
*
X(
*
X#
*2VC
} X@
n
•
X@
n +1
•...•
X@
n +
15
•
Aud
]
Show room
X1)
, preset
X(
’s
audio configuration. Show
the input (
X@
) tied to 16
sequential outputs assigned
to room
X1)
, starting from
output
X#
.
Command description:
Response description: room #*room preset #*starting output # (StO#)* 2 (=audio) VC
input # (I#) tied to StO#•I# tied to StO#+1• ... •I# tied to StO#+15• Aud
]
N The starting output number (
X#
) should always be “1” for matrix sizes of 16 outputs or smaller.