Extron electronics CrossPoint 300 124 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 96

background image

Matrix Software, cont’d

CrossPoint 300 Matrix Switchers

•

Matrix Software

5-2

Matrix Software

Two software programs accompany the CrossPoint 300 switchers:

•

The Extron Matrix S Control Program (Extron part #29-015-01),
which communicates with the switcher via the RS-232/RS-422 port, provides
an easy way to set up ties and sets of ties.

•

The Extron Button-Label Generator, which allows you to design and print
labels for the matrix switcher’s front panel buttons.

Both programs are compatible with Windows 95/98, Windows NT, Windows ME,
Windows 2000, and Windows XP. Updates to these programs can be downloaded
from the Extron Web site (http://www.extron.com).

Matrix Switchers Control Program

Installing the software

The program is contained on a set of 3.5-inch diskettes. Load and run the program
from the hard drive.

To install the program from the floppy disk to the hard drive, run Setup.exe from
the floppy disk and follow the instructions that appear on the screen. The program
occupies approximately 1 MB (megabyte) of hard-drive space.

By default, the Windows installation creates a C:\MTRX50 directory and places
two icons (MATRIX S Control Program and MATRIX S Help) into
a group or folder named “Extron Electronics”.

The program was designed to control most Extron matrix switchers, but its
operation is limited to the features and configuration of your switcher.

The switcher can support either RS-232 or RS-422 serial communication
protocol, and operate at 9600, 19200, 38400, or 115200 baud rates.
See Selecting the RS-232/RS-422 protocol and baud rate in chapter 3,
Operation, to configure the RS-232/RS-422 port from the front panel.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201
Fax 07131 911203

[email protected]

«
...
74
75
76
77
78
...
»

Содержание CrossPoint 300 124

































































































Отзывы:

Нет отзывов

Похожие инструкции для CrossPoint 300 124

Бренд: CALIENT Страницы: 46

Бренд: CALIENT Страницы: 42

SmartCell 6A000

Бренд: Cabletron Systems Страницы: 114

Бренд: Cabletron Systems Страницы: 62

CyberSWITCH CSX150

Бренд: Cabletron Systems Страницы: 49

Cabletron CyberSWITCH CSX5500

Бренд: Cabletron Systems Страницы: 729

xStack DGS-3427

Бренд: D-Link Страницы: 246

Бренд: Raritan Страницы: 4

Бренд: Intermatic Страницы: 1

SEHI SEHI100TX-

Бренд: Cabletron Systems Страницы: 75

Бренд: Quartz Страницы: 43

Бренд: DANLERS Страницы: 2

Бренд: Intellinet Страницы: 48

ControlCenter-IP-XS

Бренд: G&D Страницы: 56

Thunder series 930

Бренд: A10 Страницы: 44

Бренд: Raritan Страницы: 7

Palert PX-01 Series

Бренд: JenLogix Страницы: 48

Plug in Digital Time Switch

Бренд: Grasslin Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды