3-23
CrossPoint 300 Matrix Switchers • Operation
Example 7: Recalling a preset
The following steps show an example in which a preset is recalled to become the
current configuration in a CrossPoint 300 84. The steps show the front panel
indications that result from your actions.
1
.
Press and release the Esc button (figure 3-37).
ENTER PRESET VIEW
ESC
CONTROL
Press the Esc button to clear all selections.
The LED blinks once.
= Blink once
1
1
Figure 3-37 — Clear all selections
2
.
Press and release the Preset button (figure 3-38).
PRESET
1
2
3
4
Preset 13
Preset 14
Preset 16
Preset 15
Press and release the Preset button.
The Preset LED lights.
All input and output LEDs
with assigned presets light.
Lit
(Preset Assigned)
Unlit
(Preset Unassigned)
Figure 3-38 — Enter
Recall Preset
mode
3
.
Press and release the Output 1 button (figure 3-39).
ENTER PRESET VIEW
CONTROL
1
2
3
4
1
2
3
4
The Enter LED blinks to indicate
the need to recall the preset.
The Preset LED remains lit.
Press and release the Output 1 button.
The LED blinks to indicate that this preset
number is selected but not recalled.
= Blinking LED
Preset 13
Preset 14
Preset 16
Preset 15
Figure 3-39 — Select the preset
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
