Operation, cont’d
CrossPoint 300 Matrix Switchers • Operation
3-36
2
.
Release the Control buttons.
3
.
To change a value
, press and release the button that relates to the desired
value (figure 3-59).
ENTER PRESET VIEW
ESC
RGBHV AUDIO
CONTROL
I/O
Press and release the LED(s) to configure the port as follows:
Baud rate:
Enter — 9600
Preset — 19200
View — 38400
Esc — 115200
Serial protocol:
RGBHV — RS-232
Audio — RS-422
The selected LEDs blink and the others remain lit.
In this example, the port is set to RS-422 at 38400 baud.
= Blinking LED
= Lit LED,
Figure 3-59 — RS-232/RS-422 and baud rate selection
4
.
Press and release an input or output button to exit the Serial Port Configuration
mode (figure 3-60).
ENTER PRESET VIEW
ESC
RGBHV AUDIO
CONTROL
I/O
5
All Control LEDs return to the unlit state.
Each I/O LED returns to its previous state.
Press and release an
input or output button.
Figure 3-60 — Exit
Serial Port Configuration
mode
The switcher requires some time to save the new serial port settings. Wait at
least 5 minutes before removing power from the switcher or the settings may be
lost.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
