Operation, cont’d
CrossPoint 300 Matrix Switchers • Operation
3-20
5
.
Press and hold the Output 3 button and the Output 4 button (figure 3-31) for
approximately 2 seconds until the LEDs light steadily. The output 3 and
output 4 video and audio signals are unmuted.
3
4
5
OUTPUTS
3
4
5
OUTPUTS
The LEDs stop blinking and light to indicate that the
RGBHV and audio outputs are unmuted.
Release the button.
Press and hold the Output 3
and Output 4 button.
2 seconds
= Blinking LED
Figure 3-31 — Unmute the outputs
If both RGBHV and audio are selected, the unmute action toggles both the
video and audio outputs. If either the video output or the audio output is
already unmuted, the muted output is unmuted and the unmuted output is
muted.
6
.
Press and release the View button to exit View-Only mode (figure 3-32).
SET VIEW
CONTROL
Press the View button
to exit
View-Only mode.
The View LED returns
to the unlit state.
All input LEDs and output
LEDs return to the unlit state.
Figure 3-32 — Press the View button to exit
View-Only
mode
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
