When priorities are the same, the lowest number of the port has higher priority.
Reserved Power
In this mode the ports are shut down when total reserved powered exceeds the amount of power
that the power supply can deliver. In this mode the port power is not turned on if the PD requests
more power than available from the power supply.
Other PoE Parameters
PoE Power Supply
For being able to determine the amount of power the PD may use, it must be defined what amount
of power a power source can deliver. Valid values are in the range 0 to 240 Watts.
PoE Mode
The PoE Mode represents the PoE operating mode for the port.
•
Disable: PoE disabled for the port.
•
Enable: Enables PoE for the port.
•
Schedule: Enables PoE for the port by scheduling.
Operation Mode
Other PoE Parameters
ISW Application Guides
76
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
