Once the host PC is connected to the switch, enter the following terminal settings:
•
Speed (baud rate): 115200 bps
•
Data bits: 8
•
Stop bits: 1
•
Parity: None
•
Flow control: None
The pin assignment of the Console cable is shown in
.
Figure 11: Console Cable Pin Assignment
System Reset
The
Reset
button is provided to reboot the system without the need to remove power. Under normal
circumstances, you will not have to use it. However, on rare occasions, the ISW may not respond and
you may need to push the
Reset
button.
Installing Industrial Switches
System Reset
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
25
