Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
All rights reserved. DRAFT. October 20, 2011
Summit Family Switches Hardware Installation Guide
281
C H A P T E R
9
Replacing AC Power Supplies in
Summit Family Switches
This chapter describes how to replace AC power supplies in a Summit X460, X480, X650, or X670 series
switch and how to remove EPS series AC redundant power supplies.
This chapter includes the following sections:
●
Replacing a Summit 300 W AC Power Supply on page 281
●
Replacing a Summit 450 W or 550 W AC Power Supply on page 284
●
Replacing a Summit 750 W AC Power Supply on page 286
●
Replacing a Summit X850 W AC Power Supply on page 289
●
Removing EPS Series AC Redundant Power Supplies on page 291
NOTE
Read the information in this chapter thoroughly before attempting to replace one of the listed
Summit X650 components.
Replacing a Summit 300 W AC Power Supply
The Summit 300 W AC power supplies are compatible with the Summit X460 series non-PoE switches.
These switches have two bays for hot-swappable power supplies. In a switch with a redundant power
configuration, you can replace one Summit AC power supply without powering down the switch.
You need the following tools and materials to replace a Summit 300 W AC power supply:
●
Thermal protective gloves
●
AC power cord, if you will not be re-using the cord from the removed power supply
An AC power cord is not included with a Summit AC power supply. You must obtain a power
supply cord that meets the requirements listed under
“Selecting Power Supply Cords” on page 339
.
To replace a Summit 300 W AC power supply:
1
Disconnect the AC power cord from the wall outlet and from the power supply.
2
Note the orientation of the installed power supply.
