Summit WMScanner Quick Start Guide - Page 12 of 17
Step 6: Select the desired WLAN adapter to perform the site survey. If no adapter is listed ensure you have
installed the custom driver or contact Extreme Networks wireless software support team at
.
Step 7: A panel should now appear towards the bottom of the drawing window. If there are any APs in the
vicinity, the list under the Visible Access Points
Visible Access Points
Visible Access Points
Visible Access Points section will start populating. It is recommended that you let
the Visible Access Points
Visible Access Points
Visible Access Points
Visible Access Points list refresh at least 5 times before proceeding (this can be seen by periodic
updates to the Visible Access Points
Visible Access Points
Visible Access Points
Visible Access Points list).
Note:
Note:
Note:
Note: If the Visible Access Points
Visible Access Points
Visible Access Points
Visible Access Points list does not populate and you are certain that there are active APs nearby,
click the Exit
Exit
Exit
Exit button. You need to ensure that you are not associated to an AP under the Windows Wireless
Network Connections. Also, if the laptop used to perform the site survey has an active internal wireless
card, try disabling the internal card and then proceed with using Summit WMScanner.
