Summit WMScanner Quick Start Guide - Page 11 of 17
Step 4: In the Configure Real Time Measurement Run Information
Configure Real Time Measurement Run Information
Configure Real Time Measurement Run Information
Configure Real Time Measurement Run Information window, there are several options
available. You can change the Measurement Run name, the location where the measurement run log file is
saved, and what standards and channels to scan for.
Step 5: The default survey option is to scan channels 1-11 on the 2.4 GHz band and channels 34-64, 149-
165 on the 5 GHz band. If you need to change the default scan settings, click the Configure Scan Settings
Configure Scan Settings
Configure Scan Settings
Configure Scan Settings
button. In the Configure Scan Settings
Configure Scan Settings
Configure Scan Settings
Configure Scan Settings window, select the channels you wish to scan and make any desired
changes to dwell times. Click OK
OK
OK
OK and then click Next
Next
Next
Next on the Configure Real Time Measurement Run
Configure Real Time Measurement Run
Configure Real Time Measurement Run
Configure Real Time Measurement Run
Information
Information
Information
Information.
Note:
Note:
Note:
Note: We suggest that users select a dwell time of at least 150 ms for all channels scanned.
