Extreme Networks Summit 200-24, Руководство по установке оборудования

Страница: 89 / 386

Summit1i Switch
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 89
Figure 37: Rear view of the Summit1i switch
The Summit1i rear panel includes two AC power sockets, a system label, a reset button, and the console
port.
LEDs
Both Summit1i models have the following LEDs:
• Unit status
• Management
• Port status
• Port speed
GBIC Ports
Both Summit1i switch models provide two unpopulated GBIC ports with SC connectors. You can use
the following GBICs in the Summit1i switch:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LX70
• ZX GBIC
• LX100
• UTP GBIC
For more information about the supported GBIC types, see “GBIC Type and Hardware/Software
Support” on page 23. For specifications of individual GBIC models, see “GBIC Specifications” on
page 338.
Power Sockets
The Summit1i switch has built-in dual redundant power supplies. Each power supply has its own
power socket. When the second power supply is connected to a second independent power source, both
provide a redundant, load-shared power source to the Summit1i switch. If one of the power sources or
power supplies fails, the second power supply provides all power needs, ensuring uninterrupted
network operation.
SHG_Rr1
AC Connectors Console port Reset button Label