Extreme Networks ISM Provision, Руководство пользователя

Страница: 130 / 146

B-2 Network Infrastructure Manager User Guide
Table B-1: Rules Checked by the NIM client and ISM Provision server
Object Rule Type
Access List (ICMP, IP,
TCP, & UDP) Check if the label/name is already in use by an
Abstract VLAN (VLAN or Sub-VLAN) or a STPD object Error
Check if the specified addresses extend into their address
masks Error
Check if the specified precedence of all access lists are not
unique Error
Device Check module/slot compatibility in Alpine 3802 Error
Device IGMP Check if response interval > query interval in timer Error
Device OSPF Check if Default Route is enabled when modifying Cost,
Tag, or External Type parameters Error
Check if at least one VLAN in the device is in an IP
Forwarding mode while enabling OSPF Error
Device RIP Check if Default Route is enabled when modifying Cost,
Tag, or Always Advertise parameters Error
Check if at least one VLAN in the device is in an IP
Forwarding mode while enabling RIP Error
Check if update time > route timeout in timer Error
EAPS Domain Check if hello time > fail time in timer Error
Check if control VLAN’s QoS Profile is not QP8 Warning
Check if the primary and secondary ports are not tagged
and added to the control VLAN Warning
FDB Entry For each port in the entry, check if it is not in the VLAN Error
Check if a VLAN is not assigned to the entry Error
Gigabit Ethernet Port For ports 49 and 50 on Summit 48i, check if the user has
configured a software-based redundant port Error
IO Board Check if explicit configuration has been unselected Error
Check if module is not supported by the device type and
agent version Error
Load Sharing Check if the logical port does not exist in the list of physical
ports Error
Check if member ports of a Black Diamond are on same
board Error
Check if any of the member ports are not enabled Error
Check if there are more than eight member ports Error