manualshive.com logo in svg

Extreme Networks ExtremeWireless AP560i, Руководство по установке, Страница: 33 / 46

Поделиться
Скачать
Extreme Networks ExtremeWireless AP560i Скачать руководство пользователя страница 33

4. Attach the KT-147407-02 pole part to the other end of the KT-150173-01 extension arm using two

M12 screws and M12 hex-nuts.

Figure 10: Attaching the KT-150173-01 extension arm to the 1-axis tilt part of the

KT-147407-02 bracket

5. Insert 0.5 in. stainless-steel cable clamps through the KT-147407-02 pole part long slots.
6. Position the cable clamps around a pole and attach the pole bracket to a pole.
7. Insert the ends of the cable clamps around the pole and tighten the clamp screws to a torque of 11

in-lbs.

Mount the Access Point to a Pole using the Pole Part of the KT-147407-02 Bracket

Before You Begin

The following hardware is required for pole installation using KT-147407-02 pole bracket part to the
access point:

•

Pole part of the KT-147407-02 bracket

•

Four M6 screws

Install the Access Point

Install the Access Point on a Pole Using KT-147407-02

Bracket Parts and KT-150173-01 Extension Arm

ExtremeWireless™ AP560i Access Point

33

Содержание ExtremeWireless AP560i















































Отзывы:

Нет отзывов