manualshive.com logo in svg

Extreme Networks ExtremeWireless AP560i, Руководство по установке, Страница: 11 / 46

Поделиться
Скачать
Extreme Networks ExtremeWireless AP560i Скачать руководство пользователя страница 11

AP560i Purchase Order Information

The AP560i access point is sold by itself, and you need to order the mounting brackets and accessories
separately for under seat, wall, or pole installations.

AP560i order information

Part number

Description

AP560i-FCC

Cloud-ready, dual 5GHz, dual-band, sensor radio,

dual radio 802.11ax/ac/abgn, 4x4:4 MIMO outdoor

11ax access point. Internal Antenna.

Domain: US and Columbia

If you need to install the AP560i access point under a seat, you need to purchase the EIO-04 under-seat
enclosure. The EIO-04 under seat enclosure ships with the WS-EIO-02 silicone rubber kit.

Note
Use the WS-EIO-02 kit when you have concerns about dirt getting between the AP560i
access point rear and the stadium riser.

The ordering details are described in the following table.

AP560i Overview

AP560i Purchase Order Information

ExtremeWireless™ AP560i Access Point

11

Содержание ExtremeWireless AP560i















































Отзывы:

Нет отзывов