manualshive.com logo in svg

Extreme Networks ExtremeWireless AP560i, Руководство по установке, Страница: 21 / 46

Поделиться
Скачать
Extreme Networks ExtremeWireless AP560i Скачать руководство пользователя страница 21

6. Torque the nuts to 60 in-lbs.

Figure 3: AP560i flat surface installation with metal “L” brackets

What to Do Next

Install the Plastic Service Panel on the Access Point

 on page 37.

Install the Access Point on a Wall

Before You Begin

The access point is used with the KT-147407-02 bracket parts for wall installation. The KT-150173-01
extension arm is also used with the access point and the KT-147407-02 bracket parts for wall and flat
surface installation.

Other wall install options include using the:

•

MBO-ART02 bracket

The following hardware is required when installing the access point on a flat surface using the
KT-147407-02 bracket:

•

One access point

•

Flat part of the KT-147407-02 bracket with two holes on the metal surface (see 

Flat part of the

KT-147407-02 bracket

).

•

1-axis tilt bracket (see 

Figure 5

 on page 24).

•

KT-150173-01 extension arm (see 

Figure 6

 on page 25).

•

Six M6 screws

•

Four M6 size hex-head screws

•

Screw-in anchors if the access point is being mounted on a wood wall or a concrete surface.

Note
The M6 hex-head screws and screw-in anchors must be provided by the installer.

Install the Access Point

Install the Access Point on a Wall

ExtremeWireless™ AP560i Access Point

21

Содержание ExtremeWireless AP560i















































Отзывы:

Нет отзывов