Extreme Networks Altitude 4600 Series, Руководство по установке, Страница: 8 / 47

Introduction
Altitude 4600 Series Access Point Installation Guide
8
Warnings
●
Read all installation instructions and site survey reports, and verify correct
equipment installation before connecting the Altitude 4600 Access Point to its power
source.
●
Remove jewelry and watches before installing this equipment.
●
Verify that the unit is grounded before connecting it to the power source.
●
Verify any device connected to this unit is properly wired and grounded.
●
Connect all power cords to a properly wired and grounded electrical circuit.
●
Verify the electrical circuits have appropriate overload protection.
●
Attach only approved power cords to the device.
●
Verify the power connector and socket are accessible at all times during the
operation of the equipment.
●
Do not work with power circuits in dimly lit spaces.
●
Do not install this equipment or work with its power circuits during thunderstorms
or other weather conditions that could cause a power surge.
●
Verify there is adequate ventilation around the device, and that ambient
temperatures meet equipment operation specifications.
Site Preparation
●
Consult your site survey and network analysis reports to determine specific
equipment placement, power drops, and so on.
●
Assign installation responsibility to the appropriate personnel.
●
Identify and document where all installed components are located.
●
Provide a sufficient number of power drops for your equipment.
●
Ensure adequate, dust-free ventilation to all installed equipment.
●
Identify and prepare Ethernet and console port connections.
●
Verify cable lengths are within the maximum allowable distances for optimal signal
transmission.