Extreme Networks Altitude 4600 Series, Руководство по установке, Страница: 16 / 47

Hardware Installation
Altitude 4600 Series Access Point Installation Guide
16
1
If required, install and attach a security cable to the unit’s lock port.
2 Plug the Ethernet cable into the unit and to a switch with an 802.3af-compatible
power source.
3 Face the bottom of the T-bar with the back of the case.
4 Orient the case by its length and the length of the T-bar.
5 Rotate the case in place 45 degrees clockwise, or about 10 o’clock.
6
Push the back of the case onto the bottom of the T-bar.
7 Rotate the case 45 degrees counter-clockwise. The clips click as they fasten to the T-
bar.
8 Verify the unit has power by observing the LEDs.
External Antenna Wall Mount Instructions
Wall mounting requires hanging an Altitude 4600 Series Access Point along its width or
length using the pair of slots on the bottom of the unit. The access point can be
mounted on to any plaster, wood, or cement wall surface using the provided wall
anchors when necessary. The illustration on the next page shows a lengthwise mount.