Extreme Networks Altitude 4600 Series, Руководство по установке, Страница: 17 / 47

Altitude 4600 Series Access Point Installation Guide
17
Wall Mount Hardware
The following hardware is required to complete the wall mount of an Altitude 4600
Series Access Point (external antenna version):
●
Two wide-shoulder Phillips pan head self-tapping screws
●
Two wall anchors
●
Safety wire (recommended) and a security cable (optional)
NOTE
In the event that the original mounting screws are lost, the following screws can be used instead:
(ANSI Standard) #6-18 X 0.875in. Type A or AB Self-Tapping Screw, or (ANSI Standard Metric)
M3.5 X 0.6 X 20mm Type D Self-Tapping Screw.