manualshive.com logo in svg

Extreme Networks Altitude 4522 Series, Руководство по установке, Страница: 19 / 68

Поделиться
Скачать
Extreme Networks Altitude 4522 Series Скачать руководство пользователя страница 19

External Antenna Model Wall Mount Instructions

Altitude™ 4522 Series Access Point Installation Guide

19

NOTE

When pre-drilling a hole, the recommended hole size is 2.8mm (0.11in.). 

5

Place the Access Point on the anchor. Insert screws through the Access Point’s mounting 
ears and into the anchor.

6

If required, install and attach a Kensington security cable (customer supplied) to the 
unit’s lock port.

7

Attach an Ethernet cable from the Access Point to a controller with an 802.3af-compatible 
power source or use the PWRS-14000-148R power supply to supply power to the 
Altitude 4522 Access Point (once fully cabled).

8

Attach appropriate antennas to the connectors.

9

Attach an Ethernet cable from the Access Point to a controller with an 802.3af compatible 
power source.

10

Verify that the Access Point is receiving power by observing that the LEDs are lit or 
flashing.

CAUTION

If you are not using a 802.3af capable controller to power the Altitude 4522 Access Point, 

ensure that only the Altitude 4522 Access Point’s designated power supply (PWRS-14000-148R) is 
used. Using an incorrectly rated power supply could damage the unit and void the product warranty. 
Do not actually connect to the power source until the cabling portion of the installation is complete.

Wall Mount Procedure - Existing Access Point 
Replacement

An external antenna Altitude 4600 Series Access Point, installed on a wall (plenum 
installation), can be replaced by an Altitude 4522 Access Point. Simply remove the legacy 
Access Point from its mounting screws, leave the mounting hardware in place and install 
the new external antenna Altitude 4522 Access Point directly on to the existing mounting 
hardware. The cabling procedure for such a replacement is the same as described in the 
previous section.

Содержание Altitude 4522 Series





































































Отзывы:

Нет отзывов