Extreme Networks Altitude 4511 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 59

Extreme Networks Altitude 4511 Скачать руководство пользователя страница 9

Altitude™ 4511 Access Point Installation Guide

9

C H A P T E R

2

Hardware Installation

Installation Instructions

An Altitude 4511 Access Point mounts either on a wall, under a table or over a Telco Box.
The Altitude 4511 Access Point is not plenum rated.

NOTE

The provided metal mounting plate is fastened to an existing standard Telco in-wall box. The

box is customer provided within the customer building structure, and can be either plastic or metal in
composition. Screws and other mounting hardware are not included.

The Altitude 4511 Access Point is mounted to a wall or Telco Box so the mounting plate is
flush with the mounting surface.

The Altitude 4511 Access Point snaps on to the mounting plate without the use of tools or
fastening hardware. Removal of the Altitude 4511 Access Point from the mounting plate can
be accomplished without the use of a tool. A mounting lock screw is provided to help
ensure a tamper resistant installation.

NOTE

Once installed onto the mounting plate, the assembly can resist a minimum of 10 lbs of force

before unit breakage or accidental disassembly.

«
...
7
8
9
10
11
...
»

Содержание Altitude 4511




























































Отзывы:

Нет отзывов