Extreme Networks Altitude 4511, Руководство по установке, Страница: 8 / 59

Chapter 1: Introduction
Altitude™ 4511 Access Point Installation Guide
8
The Altitude 4511 Access Point ships with a single dual-band radio supporting the 802.11a/
b/g/n radio bands.
The Access Point contains runtime firmware which enables the unit to boot after either a
power up or a watchdog reset. The runtime firmware on the Access Point can be updated
via the Ethernet interface.
The front of the Altitude 4511 Access Point has an access cover that can be removed to
expose an additional connector. A three port RJ-45 Ethernet expansion module connects to
the hidden header and snaps onto the Altitude 4511 Access Point in place of the access
cover.
Remove the Altitude 4511 Access Point’s access cover by inserting a tool into the circular
hole (opening) on the bottom of the Altitude 4511 Access Point. Pull the access cover up and
away from the Altitude 4511 Access Point. Reverse the procedure to install the expansion
module.
The Ethernet expansion module has three ports labeled FE2, FE3 and FE4.
The expansion module (Part Number KT-6511-0000D-WR) is a separately orderable
component from Extreme Networks.