Extreme Networks Altitude 4511, Руководство по установке, Страница: 33 / 59

Using the Initial Setup Wizard
Altitude™ 4511 Access Point Installation Guide
33
15 Set the following DHCP and Static IP Address/Subnet information for the WAN
interface:
●
Use DHCP - Select the checkbox to enable an automatic network address
configuration using the external DHCP server.
●
Static IP Address/Subnet - Enter an IP Address/Subnet and gateway for the Access
Point's WAN interface. These are required fields.
●
The port connected to the WAN - Select the port used as the physical Access Point
connection to the external network. This ports available differ depending on the
Access Point model deployed. Access Point models with a single port have this
option fixed.
●
Enable NAT on the WAN Interface - Select the checkbox to allow traffic to pass between
the Access Point's WAN and LAN interfaces.
16 Select Next . The Initial AP Setup Wizard displays the Radio Configuration screen to define
support for the 2.4GHz radio band, 5GHz radio band or to set the radio's functionality
as a dedicated sensor. An Altitude 4511 Access Point supports a single dual-band radio.