Extreme Networks Altitude 4511, Руководство по установке, Страница: 16 / 59

Chapter 2: Hardware Installation
Altitude™ 4511 Access Point Installation Guide
16
6 Install the RJ11 (keystone style) connector into the Altitude 4511 Access Point’s snap-in
port.
7 If using the optional second RJ-45 Ethernet port (utilizing a pass through keystone
cable), ensure the following steps are completed:
a Bend the cable into a “U” shape so the mini pin connector and the RJ-45 keystone
cable are in close proximity to one another.
b Install the mini pin connector into the pin socket on the back of the Altitude 4511
Access Point. The connector is keyed and can only be installed one way. Ensure the
mini pin connector is connected securely.
c Remove the blank plug from the keystone hole by gently pushing it out from the
back.
d
Orient the RJ-45 keystone connector so the flexible keystone tab is away from the
mini pin connector. Tip the keystone RJ-45 while installing in the keystone opening so
the solid locking tabs engage, then rotate the RJ-45 forward until the tab snaps
securely.
8 Install the RJ-45 double plug uplink jumper into the UP1/POE jack and connect it into
the RJ-45 Ethernet connector.
To PBX
RJ45 connector