Tech Line: 651-357-1874 | [email protected] | www.extrememax.com
2
Attach the Motor Assembly to the Torque Arm
1. Slide the torque arm into the motor assembly.
2. Insert 5/8” bolt and hand tighten the 5/8” locking nut.
Assemble the Offset Bracket
1. Insert the spacer bar into the offset bracket and align the holes.
2. Insert two 3/8” bolts and hand tighten until the ends of the bolts are flush with the bottom of the spacer bar.
Assemble the Torque Arm
1. Slide the pieces of the torque arm together. Insert the two 1/4” bolts and hand tighten. Use your 3/8 socket or wrench to
tighten completely.
2. Flip the torque arm over.
3. Insert the remaining two 1/4” bolts. Hand tighten. Then use your 3/8” socket or wrench to tighten completely.