4
3. Connect the velcro on roof corners to the
velcro on the corners of the marquee legs.
7. Lift all roof connectors until pins lock in to
position. Stand on foot plate and lift with two
hands until you hear a ‘Click’.
6. Ensure there are no trip hazards. Walk
backwards and open frame fully.
11. Insert the centre leg and extend
completely.
REFER TO SECURING YOUR
MARQUEE ON PAGE 1.
2. Open frame 75% of full extension.
1. Remove all your items from packaging and
clear a safe area.
4. Fit the peak of the roof to the centre poles
of the marquee and tighten the toggle.
8. Ensure protective flaps are over the truss
connectors. Attach them by looping the straps
around the truss and engaging the clips, then
tighten.
5. Refer to ‘LIFT HERE’ sticker. Grasp the
marquee truss bars.
9. Extend the front legs halfway. Repeat for
back and middle legs. Using one foot, stand
on the marquee foot plate, release the pull
ring on the middle leg connector and extend
front legs to desired height.
10. Extend the front legs to full height. Repeat
for back and middle legs.
CORRECT ROOF PLACMENT
REFER TO PAGE 5 >>
6X6M SETUP INSTRUCTIONS
Please read instructions completely before setting up your tent. Make sure you have all the parts identified on the Parts List.
Recommended procedure below. For safety reasons it is recommended that 3 persons set up / pack down a 6x6m marquee.
