29. If using the included Side Force Generators now is the time to mount
them. Each SFG mounts using 2 3mm thumb screws and 2 clear plastic
washers. There is also a clear spacer that fits between the wing tip and SFG
to prevent the SFG from interfering with the aileron movement. There are 2
laser cut holes in each SFG which correspond with 2 laser cut holes in the tip
of each wing. Insert the bolts into the plastic washers and through the laser
cut holes in the SFG and the holes in the clear spacer. Mount the SFG onto
the wing tip by inserting the 2 bolts into the pre-installed blind nuts in the tip
of the wing.
30. Slide the carbon fiber wing tube into the fuselage and the wings onto the tube. Secure
to the fuselage using the 2 3mm bolts and washers inserted through the tabs and into the
pre-installed blind nuts.
23
