11. Insert the stabilizer into its slot and the carbon fiber wing tube into the
plastic sleeve. Use a ruler to insure that the stabilizer is centered in its slot
and compare the stabilizer to the wing tube to make sure it is properly
aligned. Sand or shim the slot if necessary to ensure proper alignment.
Secure the stabilizer with CA.
12. Remove the covering over the right slot on the bottom of the elevator
where the elevator control horn will be installed. The elevator horn is the one
with the shortest shank that is glued into the surface. Scuff the portion of the
control horn that will insert into the elevator with sandpaper. Secure the
control horn with medium CA
.
12
