28
31. Slide both stab/elevator assemblies onto the carbon fiber mounting tube and secure with 2 3mm bolts
inserted through a washer and the mounting tabs and into the corresponding blind nuts already installed
in the fuselage. Be sure to use a drop of blue Loctite on all bolts!!!
32. There is a location pre-cut for a throttle servo in the bottom of the motor box. This will work for
some engines but others may require a different mounting location. Included in your kit is a laser cut
servo mount that you can assemble and use to mount your throttle servo where it will work best. You
will need to fabricate your own throttle linkage to accommodate your choice of engine. I used a short
length of 2-56 threaded rod inside a piece of carbon fiber tube with 2-56 ball links on each end.