22
Wing Cannons: place a piece of
tape on the leading edge of the
wing, and take your time to line up
and mark positions in front of the
shell casing vents (the four black
rectangles underneath the wing),
as shown.
Drill pilot holes and drill to size for
the carbon cannon tubes.
Sand the carbon tubes that will be
inserted into the wing as shown.
Measurements: 60mm, 42mm,
25mm, 2mm (largest closest to
fuselage).
Glue into place using epoxy or thick
CA.
Shown here completed with some
basic art acrylic paint (if you look at
the aircraft photo at the start of the
manual, I over-did it with the
airbrushed black soot that is not
scale but looks awesome
).
