16
Using drill, screw the ball links
onto the end of the pushrods, and
insert them into the model.
Using 2mm bolts, nuts, and
washers, attach them to the
control horns.
Note:
The longer pushrod is for
the rudder side, and the shorter
pushrod is for the elevator.
Final result should look as shown.
Add the Quick-links to the arms of
the servos for rudder and elevator.
Center servos for the elevator and
rudder, and position arms so that
neutral is perpendicular to the
pushrods as shown.
Note:
This aircraft does not
require a lot of throw, so may be
able to use a hole closer to the
servo head than usual to maximize
servo torque/resolution.
