5
1. Middle Leg. Push the lower leg push button
and fully retract middle leg.
2. Corner Legs. Push the lower leg push
button/s and fully retract front legs.
3. Back Middle Leg. Push the lower leg push
button and fully retract middle leg.
4. Back Corner Legs. Push the lower leg push
button/s and fully retract back legs.
<< RETURN TO STEP 4 ON
PACK DOWN INSTRUCTIONS
10’ X 20’ PACK DOWN INSTRUCTIONS
Recommended procedure below. For safety reasons it is recommended that 2 persons pack down any tent.
1. Prepare all parts ready for assembly.
REMOVE Zip Ties from Wheels, keep the
bearings in position.
2. Insert the bolt through the wheel and
bearing. Thread the nut until finger tight to
secure the wheel. Repeat on other side.
3. Insert the assembled wheel and bolt into
the connector on the base of protective cover,
thread the bolt until finger tight.
MOVING WHEELED PROTECTIVE
COVER
with tent fitted. Check area/path is clear of
objects. Holding top and bottom handles of
protective cover. Lean the unit back until all
weight is on wheels, push gently.
5. Tighten the nut on the inside of wheel until
tight. ENSURE WHEEL SPINS FREELY.
Repeat on other side.
4. Spanner provided. Tighten the bolt on the
outside of wheel until tight.
PROTECTIVE COVER - ATTACHING WHEELS
Recommended procedure to follow in this document. What you’ll need: Retractable Knife or Scissors are required.
