3
9. Middle Legs.
Lift the front back roof connectors until pin locks into position.
12. Extend the front middle leg to desired
height.
13. Stand on the foot plate and extend back
corner legs to desired height.
14. Extend the back middle leg to desired
height.
REFER TO SECURING YOUR CANOPY.
11. Stand on the foot plate and extend front
corner legs to desired height.
Fit Tie Down Straps, Sandbags, Steel Pins or Weight Plates and anchor canopy into position.
Using the anchoring products below will not guarantee your canopy will be secure during adverse weather. It is
recommended all tents are pulled down during adverse weather conditions.
10. Ensure protective flap is over the connector. Attach roof straps by
looping straps around frame and engaging clip.
10’ X 20’ SET- UP INSTRUCTIONS
Recommended procedure below. For safety reasons it is recommended that 2 persons set-up any tent.
SECURING YOUR CANOPY
UPGRADE
33lb SANDBAG
UPGRADE
22lb-33lb WATER WEIGHT
UPGRADE
33lb STEEL WEIGHT PLATE
STANDARD PACKAGE
STEEL PINS
STANDARD PACKAGE
TIE DOWN STRAPS
