Extrema Machinery XS-1A25, Руководство пользователя

Страница: 4 / 27

27. Protective guards and shields must be in place at all times unless they must be removed
for specific service or maintenance. They should be immediately replaced when service or
maintenance is completed.
28. Make sure that operator clearly knows how to stop the machine before starting work.
29. Never clean or remove chips while the machine is running.
30. Maintain the machine in good operating condition. Report unusual conditions or machine
malfunctions immediately.
31. Do not alter or remove guards or warning labels.
32. Keep the immediate area clean. Do not allow the floor to become slippery, or covered with
dust or obstacles. Dust that accumulates in the work area is a hazard that can cause you
to fall or slip against the machine or its controls.
33. Employees should be required to report to their supervisors any hazardous condition of the
machine or in the immediate area.
34. Be careful with your hands on the following sports when operating the sander.
SHIPPING & RECEIVING INSTRUCTIONS
This machine has been carefully inspected and tested before packing. It was delivered in
good condition and was shipped in one wooden pallet.
When receiving this machine, inspect the wooden pallet and check to see if there is any
damage. Then check the machine model and all items as according to the packing list.
If there is any damage on the machine or any missing parts, report it to your local distributor or
the machine manufacturer immediately.