FALO’ 1XLP
Step 5
Hook the two missing upper tiles (E and F) to the related
metallic supports using the proper hooking rods as shown in
fi gure.
F
E
Step 6
Now, hook the 2 pre-assembled assemblies using the rod that
has been removed before.
Step 7
Place the 2 side tiles (G and H) tightening them slightly with
the screws and the ovalized washers pre-assembled on the
frame (the protruding part of the washers has to be turned
towards outside to allow the support of the upper tiles). Adjust
the central majolica (I) opening frontally the side elements
towards outside. Now, place the side tiles again and tighten all
screws moderately.
H
I
G
ENGLISH
