Extraflame Comfort Plus, Руководство пользователя

Страница: 38 / 48

CLEANING
38
Chapter 8
CLEANING THE HEAT EXCHANGER
(MONTHLY)
The heat exchangers chamber must be cleaned every
month as the soot deposited on the rear of the cast iron
hearth wall blocks the regular fl ow of fumes.
To access the heat exchangers, remove the central piece
from the hearth wall, following the operations described
below:
Remove the brazier from its location
™
Turn the lockbolt by 180°.
™
Hold the extractable cast iron and pull it downwards.
™
Finally, slide it from the combustion chamber by
™
pulling it towards yourself, paying attention to the 2
lateral cast iron hooks below.
Once the heat exchanger compartment can be accessed
use the supplied fi re irons to remove and scrape the
soot deposited and only then use the suction device to
completely remove the ash.
When cleaning has been completed, re-position the
extractable cast iron with the opposite movement used to
remove it. When the hearth wall has been positioned, turn
the lockbolt to take it to its original position.
DOOR, ASH DRAWER AND BRAZIER GASKETS
The gaskets guarantee the tightness of the stove and its
consequent good functioning.
These must be checked regularly: if they should be worn or
damages they must be replaced immediately.
These operations must be carried out by an authorised
technician.
For correct functioning, the stove must
undergo routine maintenance by an
authorised technician, at least once a year.
LOCKBOLT
If the power supply cable is damaged, it must be replaced by the after-sales service or by a similarly qualifi ed
person, so as to avoid al risks.
CONNECTION TO THE FLUE
Suck and clean the pipe that leads to the fl ue yearly or anytime that it is necessary. If there are horizontal
tracts the residues must be removed before they can obstruct fl ue passage.
NON-CLEANING jeopardises
safety.
fi gure 8.4
fi gure 8.5
fi gure 8.6