manualshive.com logo in svg

Extraflame Comfort Plus, Руководство пользователя, Страница: 37 / 48

Поделиться
Скачать
Extraflame Comfort Plus Скачать руководство пользователя страница 37

CLEANING

37

Chapter 8

Chapter 8

CLEANING

Maintenance operations guarantee correct functioning of the product through time.
Failure to comply with these operations can jeopardise the safety of the product.

 

fi gure 8.1

CLEANING THE BRAZIER

The brazier must be cleaned every day.

remove the brazier from the relevant 

 

™

compartment and free the holes using the 
appropriate fi re irons supplied.

remove the ash from the brazier using a suction 

 

™

device.

suck the ash deposited in the brazier 

 

™

compartment.

ATTENTION!!!

Removal of the divider jeopardises 
the safety of the product and leads 
to the immediate voiding of the 
warranty period. In the case of wear 
or deterioration request after-sales 
assistance for replacement of the 
part (replacement that is not under 
guarantee as the component is subject 
to wear).

USING THE SCRAPERS

Cleaning of the heat exchangers allows to guarantee 
constant heat output through time. This type of 
maintenance must be performed at least once a day. 
To do this, just use the relevant scrapers positioned 
in the upper part of the stove, making upward 
movements and vice versa several times.
To make the operation easier make the movement 
simultaneously for both rods.

CLEANING THE ASH COLLECTOR TRAYS

The ash collector trays, positioned at the sides of 
the brazier, must be emptied when required using a 
suction device.

Scrapers

 

fi gure 8.2

 

fi gure 8.3

Содержание Comfort Plus

















































Отзывы:

Нет отзывов