VT30-E-EU-EN-V5.0-3/12
6
Maintenance
Battery replacement
1. The
BAT
icon will appear in the lower right of the display when the
battery voltage becomes low. Replace the batteries when this appears.
2.
Disconnect the meter from any test device or circuit before opening the
tester.
3.
Loosen the recessed Phillips head screw at the bottom of the tester.
Do not remove the screw.
4.
Hold the meter and pull the lower portion of the meter off until the
batteries are exposed.
5.
Replace the two ‘AAA’ batteries observing polarity and dispose of the
old batteries properly.
6.
Slide the meter back together and replace the screw.
You, as the end user, are legally bound (
EU Battery ordinance
)
to return all used batteries,
disposal in the household garbage is prohibited!
You can
hand over your used batteries / accumulators at collection points in your community or
wherever batteries / accumulators are sold!
Disposal:
Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
Cleaning and Storage
Before cleaning the tester, ensure that the test leads are not connected to any circuit or device. Wipe
the meter only with a damp cloth as needed. Do not apply abrasives, solvents, or other cleaners to the
surface of the meter. Store with the battery removed and avoid extreme temperature and humidity.
