Extech Instruments
30 TKG250- EN V2.4 11/13
The Gain selection is available from the
Measurement
screen to either AGC (Auto Gain
Control) or Manual (1dB step) for the waveform models. You can also adjust the gain for
waveform gauges from the live A-Scan. To adjust gain during a live A-Scan, press the
right or left arrow until gain is highlighted, then use the up or down arrow or F2 to return
to AGC and F1 when done.
In the non-datalogger version gauge, the
F3
key allows you to select the
Gain
option
directly without having to go to through the
Measurements
Setup
mode. In the
datalogger version, F3 becomes
Dir
(Directory).
1.
Use the up and down arrow keys in the
Measurement
screen to highlight the
Gain
option and press the
OK
key.
The following Gain parameters are available:
2.
Use the up and down arrow keys to select the desired
Gain
option
.
3.
Press the
OK
key to accept the parameter and return to
Measure
mode.
In the
Measure
mode screen the
Gain
option that you select is displayed to the left of the
battery indicator as shown below under the F for freeze flag on the bottom right:
Содержание TKG250
Страница 1: ...USER GUIDE Model TKG250 Ultrasonic Thickness Gauge ...
Страница 41: ...TKG250 Ultrasonic Thickness Gauge 41 ...
Страница 71: ...TKG250 Ultrasonic Thickness Gauge 71 F1 F3 ...