HOW TO ENTER SETUP MODE
Press and hold the
MODE
button while turning the rotary switch to any ON position. The meter
will enter setup mode, these parameters will be saved in non-volatile memory even when the
meter is turned off.
Changing the parameters in setup mode:
1. Press
“
3
(LEFT)
” or “
4
(RIGHT)
” button to select which menu item to be set.
2. Press
“
5
(UP) or
6
(DOWN)
” button to change the parameter.
3. Push
“
OUTPUT
” button momentarily to save your setting.
4. Push
“
SHIFT
” button momentarily to exit setup mode.
The following table describes the setup menu items, the factory settings and user selectable
parameters.
Table-2 Descriptions for Setup Menu Items
Menu item
Factory
Setting
Selectable Parameters
Baud Rate
9600
2400, 4800, 9600 and 19200
Parity
None
Odd, even or none
Data bit
8
8 bits or 7 bits (Stop bit is always 1 bit)
ECHO
OFF
ON or OFF
Printer-Only
OFF
ON or OFF
Percentage scale
4-20mA
4-20mA and 0-20mA for % scale readout
Frequency
0.5Hz
Set minimum measuring frequency, 0.5, 1 or 2 Hz.
Beeper 4800
The driving frequency can be set for
4800,2400,1200 or 600 Hz. “OFF” disables the
beeper
Temperature
°
C
/
°
F
Four combinations can be set:
1.
°
C only
2.
°
C and
°
F
3.
°
F only
4.
°
F and
°
C
Refresh Hold
OFF
OFF means Data Hold, set 100~1000 variation
counts to enable refresh hold.
Auto power off
15
0~99 minutes, “0” disables auto power off.
Backlight 30
0~99 seconds, “0” disables turning off the backlight
automatically.
Notes: Push the “
SHIFT
” button for more than one second to enable temperature
option. The “
” symbol will appear on the display.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
