461880 V2.2 8/09
8
CONTACT TACHOMETER RPM MEASUREMENTS
1.
Remove the Tachometer Protective Cover by loosening the screw and gently pulling
the cap away from the unit.
2.
Install one of the RPM contact tips (stored inside the Tachometer Protective Cover)
on the contact shaft.
3.
Press and hold the Tachometer Function Pushbutton (located on the right side of the
meter). Press the
FUNCTION/SEND
key to select the contact RPM mode.
4.
Lightly press the contact tip against the center of a rotating shaft.
5.
When the reading on the display stabilizes, note the reading.
CONTACT LINEAR SURFACE SPEED (ft/min or m/min) MEASUREMENTS
1.
Remove the Tachometer Protective Cover by loosening the screw and gently pulling
the cap away from the unit.
2.
Press and hold the Tachometer Function Pushbutton (located on the right side of the
meter). Press the
FUNCTION/SEND
key to select one of the linear speed modes
(M/min or ft/min).
3.
Lightly press the linear speed wheel on the moving surface to be measured.
4.
When the reading on the display stabilizes, note the reading.
RECALLING CONTACT TACHOMETER READINGS
To recall Contact Tachometer readings, press and hold the
ENTER/REC
key. Values are
displayed in 3 modes:
LA – Last reading displayed.
UP – Maximum value recorded
dn – Minimum value recorded
Repeatedly pressing and holding the
ENTER/REC
key will scroll through the 3 modes. The
value will flash, alternating between the mode indicator and value.
www.bigfoottrade.kz
